Deck Building in Arvada, CO
New decks, storm-damage rebuilds, attached and freestanding, composite and wood, with footings set below the frost line and the Jefferson County permit pulled in-house. Joseph Delgado sizes the ledger, digs the footings, and runs the build.
Get a real estimate in 60 seconds.
We'll follow up within one business day. No pressure, no upsells.
You Want a Deck That Holds, Not One That Heaves
If you are looking at deck building in Arvada, CO, the part that decides whether your deck lasts twenty years or racks loose in five is buried before the first board goes down: the footings and the ledger connection. Front Range soil freezes deep and much of west Arvada sits on expansive bentonite clay that swells when wet and shrinks when it dries, so a footing poured too shallow gets lifted every winter until the whole frame twists. A ledger lag-bolted to the house without flashing quietly rots the rim joist behind it. D&J's sets footings below the frost line, flashes and fastens the ledger to code, pulls the Jefferson County permit, and builds it. Owner Joseph Delgado digs the footings and runs the crew, so the person who signed off on the structure is the same person standing on the finished deck.
Joseph has worked in Colorado construction for over 15 years and runs every project personally from our shop at 7470 Terry Ct in Arvada. Deck building is D&J's most-reviewed service, and the reviews all say the same thing: the deck turned out exactly as the homeowner pictured it, built clean and priced fair. That is not an accident on a deck. It is what happens when the person quoting the job is the person building it, instead of a salesman handing a sketch to a crew that never met the customer. Call (303) 570-2753 and you reach the owner, not a dispatcher. Estimates are free, and licensed, insured proof is available before any work starts.
Newly built wood deck attached to an Arvada, Colorado home with railing installed
Deck Builder in Arvada, CO: The Footings Are the Whole Job
A deck looks like carpentry you can see. What holds it up is the part you cannot: the footings under the ground and the ledger bolted to the house. Both get decided before a single board is cut, and both are where a cheap deck fails. In Arvada that failure has a specific cause. The Front Range frost line runs deep, and a footing that does not reach below it gets shoved upward every freeze-thaw cycle, so by the third winter your deck is no longer level with the door it attached to.
We start every deck at the ground, not the railing. Joseph checks the soil, locates where the posts land, and digs footings below the frost line so frost heave has nothing to push against.
The other silent killer is the ledger, the board that ties the deck to your house. Bolted on without proper flashing, it wicks water straight into the rim joist and rots the connection from the inside. When we attach a deck to the house we flash it and fasten it to code, because a ledger that fails does not just drop the deck, it damages the wall behind it.
Most of the Arvada decks we build fall into a few buckets: a brand-new deck on a house that never had one, a replacement for a deck that aged out or came down in a storm, and the choice between composite and wood boards on top of the frame. Which fits comes down to your house, your yard and how you want to use the space. That is a conversation, not a calculator. Ready to talk it through? Call (303) 570-2753 and reach the owner directly.
New Deck Construction Across the Denver Metro
You call, the owner answers
No dispatcher, no answering service, no callback queue. Just a straight conversation with the person who runs your job.
(303) 570-2753- 01
New deck construction
A brand-new deck on a house that never had one, or replacing a slab patio with real outdoor living space. If a ground-level slab is the better fit for your yard, we also pour concrete and paver patios, and we will tell you straight which one your lot calls for. New deck construction across the Denver metro starts with the footings and the ledger, then the frame, decking and railing. We handle the design, the Jefferson County or metro permit, and the build, so the layout that works on paper is the layout that gets inspected. - 02
Deck replacement
Tearing out a deck that aged out, rotted at the ledger, or came down in a storm, and rebuilding it right. On a replacement we often find the original footings were too shallow or the ledger was never flashed, so we correct the structure underneath rather than reskinning a frame that was going to fail again. - 03
Composite decks
A composite deck built on a properly sized, code-fastened frame. Composite boards shrug off the Front Range sun and freeze-thaw that splits and greys wood, and they skip the every-few-years stain-and-seal cycle. The tradeoff is a higher upfront material cost, which is a conversation we have honestly before you commit. - 04
Wood decks
A traditional wood deck, cedar or pressure-treated, for the look and the lower upfront cost. Wood rewards you with warmth and punishes you with maintenance: our dry, high-altitude sun and swinging temperatures mean a wood deck needs regular sealing to hold up. We build it to last and tell you straight what keeping it up will take.
Decks We Built, in Their Words
Had a tree blowdown and completely demolish my deck. Called D&J's the next day and they were able to come to my house and give me a fair competitive price that was way better than other contractors.
Had these guys build my deck back in June. Turned out great, exactly what I had imagined. Super clean and straight forward with reasonable prices.
D&J's completed a deck project for us, they did excellent work! They were professional and timely, and completed our deck exactly how we wanted it. Highly recommend!
Quality work! I just love sitting on my new deck!!
Finished backyard deck with railing built by D&J's in the Denver area
Attached vs Freestanding, Composite vs Wood: Choosing Your Deck
Two decisions shape your deck before we ever price it, and both come down to your house and your yard rather than a catalog.
The first is how the deck meets the house. An attached deck ties to the rim joist with a ledger and is the standard build for a deck stepping out from a kitchen or living room. It needs that ledger flashed and fastened right, because that connection is doing structural work. A freestanding deck stands on its own posts and footings with no ledger at all, which is the answer when the house has a brick or stucco face that is hard to flash cleanly, when the rim joist cannot carry the load, or when the deck sits away from the house around a tree or a slope. We will tell you which your house actually calls for on the walkthrough.
"On a lot of Arvada homes with a cantilevered floor or a stucco wall, we go freestanding on purpose. Forcing a ledger onto a wall that cannot take it cleanly is how you buy yourself a rotted rim joist in five years."
The second decision is the boards. Composite versus wood is the question we get most, and the honest answer is that it depends on how you weigh upfront cost against upkeep. Composite costs more to buy but shrugs off our high-altitude sun and freeze-thaw and skips the stain-and-seal cycle. Wood costs less upfront and looks warmer, but our dry sun and swinging winter temperatures mean it needs regular sealing to avoid greying and splitting. Neither is wrong. We lay out the real tradeoff for your budget and how you plan to use the deck, then build whichever you choose on a frame sized to hold it.
We work within roughly a 25-mile radius of our Arvada shop on purpose, close enough to know the local permit counters and inspectors across Arvada, Wheat Ridge, Westminster and unincorporated Jefferson County. Want a straight read on attached versus freestanding for your house? Call (303) 570-2753 and reach the owner directly.
Decks Built Across the Arvada Area
From bare yard to a deck that holds.
Six stages, one owner accountable for the footings and the ledger.
1. Yard walkthrough
Joseph walks the property, reads the soil, checks the wall the deck will tie to, and lays out where the posts and footings land. On a deck this is where frost heave and ledger problems get headed off, and it is free.
2. Design & permit
We draw the deck and pull the permit through the correct jurisdiction, City of Arvada or unincorporated Jefferson County, with the footing depth, ledger detail and railing spec built into the plan from the start.
3. Footings below frost
We dig and pour the footings below the Front Range frost line so seasonal freeze-thaw and expansive clay have nothing to lift. This is the step cheap decks cut, and the one that decides whether yours stays level.
4. Ledger & frame
Where the deck attaches to the house, we flash and fasten the ledger to code so water cannot rot the rim joist behind it. Then the crew frames the deck square and level with Joseph on site.
5. Decking & railing
Composite or wood boards go down over the finished frame, with the railing set to code height and spacing. Quality checks happen at each stage rather than as a scramble at the end.
6. Inspection & handover
We book and meet the inspection, close the permit with the correct Arvada or Jefferson County office, and hand you a finished, permitted deck that passes and holds up.
Build Your Arvada Deck with the Owner Running It
Tell us about your yard and how you want to use the deck. Joseph walks the property, reads the soil, checks the wall it will tie to, and sends a written estimate. Call (303) 570-2753 or send your info and we will follow up within one business day.
Call directly (303) 570-2753- Free estimates
- Owner-operated
- Licensed & insured
The Deck You Pictured, Built to Hold
New build or storm rebuild, attached or freestanding, composite or wood. Joseph sets the footings below the frost line, flashes the ledger to code, pulls the Jefferson County permit, and runs the crew himself. Call <a href="tel:+13035702753" class="text-accent font-semibold hover:underline">(303) 570-2753</a> for a free estimate.